Your search results

X-Yachts 34

£ 115,000 Tax Paid
, ,
add to favorites

Racing or cruising this X-Yacht ticks both boxes. Solid yet light weight GRP sandwich construction with load bearing internal chassis. Scandinavian build quality with large sail wardrobe and race package upgrades, engine upgrade, holding tank ,cabin heating. Presented in ready to launch condition.

Area:
Country: United Kingdom
Price: £ 115,000 Tax Paid
Boat Size: 34 ft
Year Built: 2010
Boat Designer: Niels Jeppesen
LOA (metres): 10.36m
Beam: 3.41m
Displacement: 5300kg
Draft: 1.9m
Hull Material: GRP Composite
Engine/Fuel Type: Yanmar inboard diesel
Engine HP: 30
Fuel Capacity: 79L
Water Capacity: 197L
Hull and Deck
Standard X-34; 2 cabin 1 head
CE Certification Directive 94/25/CE (Category "A" Ocean)
Hull and Deck laid up using DCPD Resin system with compressed Airex density of 80-100kg/m3, with solid laminate in high load areas
Factory applied hull stripes in grey gel coat, Ral 7011
X-Yachts integrated hot galvanised steel girder system, accepting
loads from the keel and rig. Also provides the central lift point
Flush hull mounted bronze seacocks
Lead bulb keel encapsulated in GRP
Bottom treatment - 3 layers of epoxy and 2 layers of antifouling factory spray applied
Variable height GRP toe rail, 30mm high from bow to mast, 20mm high from mast to stern
4 x padeyes mounted in cockpit for safety harnesses
4 x padeyes mounted on toe rail for jackstays, including webbing jackstays
Teak in cockpit seats, floor and bathing platform
Factory fitted teak on side decks
Factory fitted midship mooring cleats
Hatches / Portlights / Ventilation / Sprayhood
Factory fitted sprayhood in grey canvas with stainless steel tubes, with cover
Guard rail / Anchor / Stainless Steel Fittings
Factory fitted carbon fibre wheel steering Chain and Cable system to a quadrant, needle roller bearings for rudder stock with the lower bearing of the self aligning type resulting in a very positive and direct feel
Factory fitted wheel crashbar with instrument box for plotter
Electric anchor winch, with remote.
Mast and Rigging
Tapered aluminium "John Mast", double spreader mast designed by
X-Yachts for stiffness, safety and ease of use (no checkstays or babystays)
Discontinuous rod rigging
Steaming light Tricolour and anchor light in mast top LED
Single line reefing system (2 reefs)
Additional 3rd reef tack at mast
Carbon pole upgrade instead of alloy pole
Lazyjacks mounted on mast and boom
Inner forestay
Track for tri-sail
Dyemma 2 : 1 Code 0 Halyard
Strengthening for code zero on anchor roller, with bobstay
Modification to boom for third reef.
Rod rigging Non Destructive Testing and certification in 2017
Sails Running Rigging and Fittings
Halyard and control lines lead aft to rope clutches in the pit area
Profurl underdeck jib furling system with twin luff grooves
Jib car adjustable under load with purchase system led to cockpit
Underdeck X-Yachts Mainsheet System led to winches at helm
Back stay is X-Yachts "Magic Wheel" system for optimal control of sail shape
Harken winches (6) Factory fitted electrical halyard winch
Halyard and control line tails stowed in cockpit rope bags
Running rigging in Spectra
Ronstan deck gear and equipment
Racing package: With carbon fibre spinnaker pole, 2 x spinnaker sheets with snap shackels, 2 x spinnaker guys with snap shackles,1 x downhaul system with lines led back on both sides on swivel bases, 1 x GF 50 blocks with wichard padeye for pole down haul, 2 x GF 75 blocks for spinnaker sheets, 2 x footblocks w. jammers for spinnaker sheets, 2 x guy fairleads, 2 x swivel bases for vang, 1 swivel base for boom outhaul, 1 x swivel base for Cunningham, additional spinnaker halyard and topping lift, 2 x additional deck organiser. Jib inhauler system with stainless steel rings and 2 x foot block and sister block for 10:1 purchase led back to 2 Ronstan cam cleats, 1 x jib snatch block for outside sheeting incl. additional genoa sheet.
Throughout the cockpit are stainless steel protection strips to avoid chaffing



Sails

2010 North Sails cruising mainsail,soft Norlam,with 5 full battens and 3 reefs.Very Good
2010 North Sails cruising furling jib, 107%, soft Norlam Very Good
2010 North Sails race light/medium 3DL Jib Worn
2010 North Sails race medium/heavy 3DL Jib Good
2010 North Sails race heavy Jib 3DL Worn
2010 North Sails race S4 spinnaker Good
2010 Collins tri-radial spinnaker, with snuffer. Very Good
2017 Westaway mainsail Carbon Light Skin Offshore 3 reefs (as new)
2015 Code zero in laminate, on Karver furler. Excellent
2016 high clewed dacron no 4 for inner forestay. As new
2016 Westaway Storm Jib as new
2016 Westaway Tri-sail. unused
Machinery and Electrical
Engine

Factory engine upgrade - Yanmar 30 HP 3YM30C instead of standard Yanmar 21 HP
Saildrive seal replaced in 2017
Engine hours - 600 November 2017

Electric anchor windlass
Electrical and manual bilge pump with suction from main bilge sump in saloon
Extra loose hose thrid manual bilge pump
Electrical bilge pump for heads shower bilge
Coolmatic cooling compressor fitted to ice box
Factory fitted Eberspacher D4 Diesel heater, with 4 outlets (aft cabin+ main cabin + owner's cabin + aft heads)
3 x 115 AH gel deep cycle batterys 2015
Spiral cell battery for engine start 55 Amp
Wiring is "tinned" to reduce corrosion
All fuses are automatic circuit breaker type Analogue VDO gauges for fuel, water and voltage
All cables are terminated in a "dry" GRP box at chart table
230 V shorepower with charger and 230V outlet socket along with electric immersion for heating calorifier
Galvanic isolator - mounted in series with with earth wire of the
shore power cable
Navigation
B&G analogue apparent 360 mounted on garage B&G GFD Multi controller
3 x B&G 20/20 mast displays mounted on B&G mast bracket
Upgraded B&G vertical mast head wind unit
Simrad Radar 18" DX 42S, 2kW linked to both plotter systems

At nav station

Simrad NSE 8" Chart Plotter
Simrad Sonic Hub, with speakers in saloon and cockpit, allowing control through either plotter (not working)
Simrad RS82 DSC VHF
Simrad wireless remote WR20
Battery monitor BTM1 from Mastervolt
B&G H3000 hydra main processor with speed and depth transducers
AIS black box transponder linked to plotters

At steering wheel Simrad NSE 8" Chart Plotter
Accommodation
Six berths in two cabins plus the saloon
Heads aft to starboard with standing shower
Galley with cooker and fridge,large sinks have hot and cold water
Chart table starboard facing forward
Interior woodwork finished in mahogany with horizontal grain, with a hand polished to a satin finish.
New upholstery 2016, with full protection cover.
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Contact Me

Compare boats

Similar Listings

Pacific Seacraft Crealock 37

1993 37ft / 11.25m
A Pacific Seacraft 37, presenting as a fine example of a long distance cruising ...
A Pacific Seacraft 37, presenting as a fine example of a long distance cruising yacht.This yacht was designed as a ...
£ 97,500 Tax Paid

Nicholson 40

1986 40ft / 12.2m
This boat is amazing. ‘Yachting artwork’ from the infamous Camper & Nicholson yard Hull # ...
This boat is amazing. ‘Yachting artwork’ from the infamous Camper & Nicholson yard Hull # 19 of 20 ever built. Renovated ...
£ 99,500 TAX PAID
  • Boat Search

    Boat Type
    Make / Model
    Length
    Price (£ Sterling)
  • Contact

    Plymouth

    Red Ensign, King Point Marina, Brunel Way, Millbay, Plymouth PL1 3EF, UK

    01752 260086

    info@red-ensign.com

  • Message us about this boat

    Fields marked with an * are required